Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
titleConvienient way to get highest ErrorCode

Just call the following command to get the currently highest value of E1XXX codes here in the doc. E1XXX only, because the E4321 is used as example below.
php -r '$text = file_get_contents("https://confluence.translate5.net/display/TAD/ErrorCodes"); preg_match_all("/(E1[0-9]{3})/", $text, $codes); print_r(max(array_unique($codes[0])));echo "\n";'

or to get a whole list sorted from lowest to highest:
php -r '$text = file_get_contents("https://confluence.translate5.net/display/TAD/ErrorCodes"); preg_match_all("/(E[0-9]{4})/", $text, $codes); $codes = array_unique($codes[0]); sort($codes); print_r($codes);echo "\n";'

In the future each error or event in translate5 should have an own event code to improve support / make live for help desk easier.

List of Error- and EventCodes

General

EventCodeContextEventMessageDescription / Solution

Anchor
E0000
E0000
E0000

everywhereSeveralCode used for multi purposes: Mostly for debug messages below level warn, where no fixed message is needed.

Anchor
E9999
E9999
E9999

everywhereSeveralDefault code used for old error messages, which are not converted yet to the new error code system.

Anchor
E1014
E1014
E1014

everywhereLog HTTP RequestThe HTTP request to the server and its parameters are logged. Generally for debugging only.

Anchor
E1015
E1015
E1015

entitiesDuplicate KeyA database key for the entity to be saved does already exist.

Anchor
E1016
E1016
E1016

entitiesIntegrity Constraint Violation

An entity can not be added or updated since a referenced entity does not exist (anymore).

Or an entity can not be updated or deleted since it is referenced by other entities.

Anchor
E1019
E1019
E1019

everywhereHTTP Status 404The requested URL / page was not found, the API endpoint in the application does not exist.

Anchor
E1025
E1025
E1025

everywhereHTTP Status 422The PUT / POST request to that URL could not be processed due invalid given data.
The invalid fields are listed in the result from the server.

Anchor
E1026
E1026
E1026

everywhereHTTP Status 422

The File Upload did not succeed PUT / POST request to that URL could not be processed due invalid given data.

The invalid fields are listed in the result from the server.

Anchor
E1041
E1041
E1041

everywhereHTTP Status 409

The PUT / POST request to that URL could not be processed due the given data would produce an invalid state of the entity on the server.

If possible, the causing fields are listed in the result from the server, or the error message is self explaining.

Anchor
E1027
E1027
E1027

everywherePHP Fatal ErrorPHP Fatal error, see error message for details.

Anchor
E1029
E1029
E1029

everywherePHP WarningPHP Warning, see error message for details.

Anchor
E1030
E1030
E1030

everywherePHP InfoPHP Info, see error message for details.

Anchor
E1072
E1072
E1072

WorkerCan not trigger worker URL: {host}:{port} Error: {errorName} ({errorNumber})The triggered worker URL is technically not available. Local firewall problems? Is the configured "runtimeOptions.server.name" available and callable from the translate5 instance? If not, it can help to configure "runtimeOptions.worker.server" with the local host name or the localhost IP, basicly the server adress which points to the local server and is available for the translate5 instance.

Anchor
E1073
E1073
E1073

WorkerWorker URL result is no HTTP answer!: {host}:{port}This can only happen if the worker URL is not pointing to an translate5 instance, or if there is an error on the translate5 instance. In the latter case investigate the log for further errors.

Anchor
E1074
E1074
E1074

WorkerWorker HTTP response state was not 2XX but {state}.This should happen only if there is an error on the translate5 instance. In the latter case investigate the log for further errors.

Anchor
E1107
E1107
E1107

WorkerWorker HTTP response state was 404, the worker system requests probably the wrong server!

Check the server URL configuration values.

Either runtimeOptions.worker.server or runtimeOptions.server.protocol and runtimeOptions.server.name are pointing to a wrong server / translate5 installation!


Users & Customers

EventCodeContextEventMessageDescription / Solution

Anchor
E1047
E1047
E1047

CustomerA client cannot be deleted as long as tasks are assigned to this client.Remove all tasks first from that customer.

Anchor
E1063
E1063
E1063

CustomerThe given client-number is already in use.There exists already a customer with that client-number.

Anchor
E1048
E1048
E1048

User

The user can not be deleted, he is PM in one or more tasks.

Change the PMs in the affected tasks.

Anchor
E1094
E1094
E1094

User

User can not be saved: the chosen login does already exist.

Use a different login.

Anchor
E1095
E1095
E1095

UserUser can not be saved: the chosen userGuid does already exist.Use a different userGuid, if no userGuid was provided explicitly, just save again to generate a new one.

Anchor
E1104
E1104
E1104

CustomerThe given domain is already in use.The given domain is already defined for one of the customers.

Task & Workflow

EventCodeContextEventMessageDescription / Solution

Anchor
E1011
E1011
E1011

Task; WorkflowMulti Purpose Code logging in the context of a taskMulti Purpose code for several info logs around a task.
Also important in Context of workflow.

Anchor
E1012
E1012
E1012

Job; WorkflowMulti Purpose Code logging in the context of jobs (task user association)

Multi Purpose Code logging in the context of jobs (task user association)
Also important in Context of workflow.

Anchor
E1013
E1013
E1013

Workflow onlyMulti Purpose Code logging in the context of pure workflow processing

Multi Purpose Code logging in the context of workflow processing

Anchor
E1042
E1042
E1042

TaskThe task can not be removed due it is used by a user.One user has opened the task for reading or editing the task. Therefore this task can not be deleted.

Anchor
E1043
E1043
E1043

TaskThe task can not be removed due it is locked by a user.One user has opened the task for editing the task, or some other action has locked the task.
Therefore this task can not be deleted.

Anchor
E1044
E1044
E1044

TaskThe task can not be locked for deletion.The task must be locked by the deleting user, before it can be deleted. This lock could not be set.

Anchor
E1045
E1045
E1045

Task; ManualStatusCheck Plug-InThe Task can not be set to finished, since not all segments have a set status.Each segment must have set a status in order to finish the task.

Anchor
E1046
E1046
E1046

TaskThe current task status does not allow that action.This error occurs if the current status of the task does not allow the triggering action.

Anchor
E1049
E1049
E1049

Task; ArchiveTaskBeforeDelete Plug-InTask could not be locked for archiving, stopping therefore the delete call.The task must be locked by the deleting user, before it can be deleted. This lock could not be set.

Anchor
E1064
E1064
E1064

TaskThe referenced customer does not exist (anymore).The user tried to add a non existence client to a task. Probably the customer was deleted in the mean time.

Jobs (Association between Tasks and Users)

EventCodeContextEventMessageDescription / Solution

Anchor
E1061
E1061
E1061

JobThe job can not be removed, since the user is using the task.The user of the job has opened the associated task for reading or editing. Therefore this job can not be deleted.

Anchor
E1062
E1062
E1062

Job

The job can not be removed, since the task is locked by the user.

The user of the job has opened the associated task for editing.

Therefore this job can not be deleted.

Import

EventCodeContextEventMessageDescription / Solution

Anchor
E1083
E1083
E1083

FileparserThe encoding of the file "{fileName}" is none of the encodings utf-8, iso-8859-1 and win-1252.The named file is not encoded in one of the three supported types.

Anchor
E1084
E1084
E1084

FileparserGiven MID was to long (max 1000 chars), MID: "{mid}".One of the MIDs in the uploaded file is too long. Maximal 1000 bytes are allowed.

Anchor
E1000
E1000
E1000

SdlXliff FileparserThe file "{filename}" contains SDL comments which are currently not supported!

Since "{filename}" can not be imported, omit that file or remove SDL comments for a successful import.

Anchor
E1001
E1001
E1001

SdlXliff Fileparser

The opening tag "{tagName}" contains the tagId "{tagId}" which is not SDLXLIFF conform!

That "{tagName}" contains the tagId "{tagId}" is not valid SDLXLIFF according to our reverse engineering of the SDLXLIFF format. Probably the parse has to be extended here.

Anchor
E1002
E1002
E1002

SdlXliff FileparserFound a closing tag without an opening one. Segment MID: "{mid}".Invalid XML structure in the mentioned SDLXLIFF file.

Anchor
E1003
E1003
E1003

SdlXliff Fileparser

There are change Markers in the sdlxliff-file "{filename}"!
Please clear them first and then try to check in the file again.

SDLXLIFF change markup is not supported.

Anchor
E1004
E1004
E1004

SdlXliff Fileparser

Locked-tag-content was requested but tag does not contain a xid attribute.

Invalid SDLXIFF according to our reverse engineering.

Anchor
E1005
E1005
E1005

SdlXliff Fileparser

<sdl:seg-defs was not found in the current transunit: "{transunit}"

Invalid SDLXIFF according to our reverse engineering.

Anchor
E1006
E1006
E1006

SdlXliff Fileparser

Loading the tag information from the SDLXLIFF header has failed!

Check if SDLXLIFF header content is valid XML.

Anchor
E1007
E1007
E1007

SdlXliff Fileparser

The tag "{tagname}" is not defined in the "_tagDefMapping" list.

Invalid SDLXIFF according to our reverse engineering. The used tags are either not contained in the tag definition list in the header, or the parser did not parse the header completely.

Anchor
E1008
E1008
E1008

SdlXliff Fileparser

The tag ID "{tagId}" contains a dash "-" which is not allowed!

Dashes are not allowed, since this may interfere with the GUI where dashes are used as delimiter in the IDs.

Anchor
E1009
E1009
E1009

SdlXliff Fileparser

The source and target segment count does not match in transunit: "{transunit}".

Invalid SDLXIFF according to our reverse engineering.

Anchor
E1010
E1010
E1010

SdlXliff Fileparser

The tag "{tagname}" was used in the segment but is not defined in the "_tagDefMapping" list!

Invalid SDLXIFF according to our reverse engineering. The used tags are either not contained in the tag definition list in the header, or the parser did not parse the header completely.

Anchor
E1017
E1017
E1017

CSV FileparserThe regex {regex} matches the placeholderCSV string {placeholder} that is used in the editor_Models_Import_FileParser_Csv class to manage the protection loop.It is not allowed to use a regular expression to protect CSV content which matches the internally used placeholder.
Please find another solution to protect what you need to protect in your CSV via Regular Expression.

Anchor
E1018
E1018
E1018

CSV FileparserThe string $this->placeholderCSV ({placeholder}) had been present in the segment before parsing it. This is not allowed.The mentioned placeholder string is used for internally replacement, therefore it may not occur in the real CSV content.

Anchor
E1075
E1075
E1075

CSV FileparserError on parsing a line of CSV. Current line is: "{line}". Error could also be in previous line!The mentioned line could not be parsed as CSV line. Check the CSV content.

Anchor
E1076
E1076
E1076

CSV FileparserIn the line "{line}" there is no third column.Each line must contain at least 3 columns: mid, source and target column. Check the CSV content.

Anchor
E1077
E1077
E1077

CSV FileparserNo linebreak found in CSV: {file}No valid line break(s) were found in the CSV, does it contain only one line?

Anchor
E1078
E1078
E1078

CSV FileparserNo header column found in CSV: "{file}"No header columns could be found, check the CSV content.

Anchor
E1079
E1079
E1079

CSV FileparserIn application.ini configured column-header(s) "{headers}" not found in CSV: "{file}"The header column names of the CSV do not match to the configured header column names in "runtimeOptions.import.csv.fields".  The missing fields according to the configuration are shown in the error message.

Anchor
E1080
E1080
E1080

CSV FileparserSource and mid given but no more data columns found in CSV: "{file}"Each line must contain at least 3 columns: mid, source and target column. Check the CSV content.

Anchor
E1067
E1067
E1067

XLF 1.2 FileparserMRK/SUB tag of source not found in target with Mid: "{mid}"In the XLF a MRK or SUB tag was referenced in the source, but the referenced segment with the given mid was not found.

Anchor
E1068
E1068
E1068

XLF 1.2 FileparserMRK/SUB tag of target not found in source with Mid(s): "{mids}"In the XLF a MRK or SUB tag was referenced in the target, but the referenced segment with the given mid was not found.

Anchor
E1069
E1069
E1069

XLF 1.2 FileparserThere is other content as whitespace outside of the mrk tags. Found content: {content}Translate5 interprets the XLIFF 1.2 specification in a way that in a segmented segment there may not be any other content as whitespace outside between the <mrk type="seg"> tags. If this is the case translate5 can not import the XLF file.

Anchor
E1070
E1070
E1070

XLF 1.2 FileparserSUB tag of {field} is not unique due missing ID in the parent node and is ignored as separate segment therefore.The XML node surrounding a <sub> tag must contain an id in order to identfy that sub tag.

Anchor
E1071
E1071
E1071

XLF 1.2 FileparserMRK tag of {field} has no MID attribute.The given MRK tag does not contain a MID attribute.

Anchor
E1020
E1020
E1020

Relais Import

Errors in processing relais files: The following MIDs are present in the relais file "{fileName}" but could not be found in the source file, the relais segment(s) was/were ignored. MIDs: {midList}

For the listed MIDs the source segment was not found to the MID in the relais file, the Relais segment was ignored on import. The affected file is also logged.

Anchor
E1021
E1021
E1021

Relais Import

Errors in processing relais files: Source-content of relais file "{fileName}" is not identical with source of translated file. Relais target is left empty. Segments: {segments} 

For the listed segments the source content in the source file and in the relais file was different, therefore no relais target content was saved to the segment.

Anchor
E1022
E1022
E1022

Relais Import

Errors in adding relais segment: Source-content of relais file "{fileName}" is identical with source of translated file, but still original segment not found in the database: {segments}

This issue is similar to ErrorCodes E1021, first a matching source segment was found to the relais segment, the source content equals, but the relais target data could not be saved. Investigate additional debug content!

Anchor
E1112
E1112
E1112

Relais ImportTask was configured with relais language, but some relais file were not found. See Details.Some of the work files do not have a corresponding file in the relais folder. In the details of the error the work files without a relais file are listed. Compare them with the files in the imported task.

Anchor
E1022
E1022
E1023

TBX

Parser

Unable to read the provided tbx file {filename}The provided file for parsing can is not readable.

Anchor
E1024
E1024
E1024

XML

Parser

Invalid XML: expected closing "{closingTag}" tag, but got tag "{receivedTag}". Opening tag was: {openingTag}Invalid xml chunk found while parsing xml file.

Anchor
E1028
E1028
E1028

TBX

Parser

{message}. \n Term collection name: {name}Log the exception/info produced while the tbx parser is running.

Anchor
E1031
E1031
E1031

Task Import - File UploadA file "{filename}" with an unknown file extension "{ext}" was tried to be imported.The uploaded file type is currently not supported.

Anchor
E1032
E1032
E1032

Task Import

The passed source language "{language}" is not valid.

The source language given for the new task is invalid or not found in the languages table of the application.

Anchor
E1033
E1033
E1033

Task ImportThe passed target language "{language}" is not valid.The target language given for the new task is invalid or not found in the languages table of the application.

Anchor
E1034
E1034
E1034

Task ImportThe import did not contain files for the relais language "{language}".No importable data was found in the import package for the chosen relais language.

Anchor
E1035
E1035
E1035

Task ImportThe given taskGuid "{taskGuid}" was not valid GUID.Please provide a valid GUID.

Anchor
E1036
E1036
E1036

Task ImportThe given userGuid "{userGuid}" was not valid GUID.Please provide a valid GUID.

Anchor
E1037
E1037
E1037

Task ImportThe given userName "{userName}" was not valid user name.Please provide a valid username.

Anchor
E1038
E1038
E1038

Task ImportThe import root folder does not exist. Path "{folder}".The provided ZIP package is unzipped on the server for further processing. That unzipped folder can not be found. This is probably a problem of permissions on the server.

Anchor
E1039
E1039
E1039

Task ImportThe imported package did not contain a valid "{proofRead}" folder.

The uploaded ZIP package did not contain a "proofRead" folder, which contains the data to be imported. See ZIP import package format.

Anchor
E1040
E1040
E1040

Task ImportThe imported package did not contain any files in the "{proofRead}" folder.The "proofRead" Folder in the imported ZIP package was empty, so there is nothing to be imported.

Anchor
E1052
E1052
E1052

Task ImportTODO Some of the tasks metaData can not be imported. See previous exception.Some of the tasks metaData can not be imported. See previous exception.

Anchor
E1053
E1053
E1053

Task Import; Pixel-Mapping MetaData

Pixel-Mapping: Import failed due not found customer specified by customer number in excel - client nr: {lastClientNr}


Anchor
E1054
E1054
E1054

Task Import; Pixel-Mapping MetaDataPixel-Mapping: missing default-values for pixel-width for font-size {fontSize}. Add the missing values to the config.Add the missing value in your defaultPixelWidths-settings in the task template config.

Anchor
E1096
E1096
E1096

Task Import; Pixel-Mapping MetaDataPixel-Mapping: ignored one ore more lines of the excel due one or more empty columns.Check the imported pixel-mapping.xlsx some of the needed columns were empty, see also error details for the collected lines with empty columns.

Anchor
E1060
E1060
E1060

Task ImportFor the fileextension "{extension}" no parser is registered. For available parsers see log details.

The user tried to import a file which can not be imported by the native import converters. See the log details for the available native importable file formats.

Otherwise consider to enable Okapi to convert the uploaded file into a native importable XLF format.

Export

EventCodeContextEventMessageDescription / Solution

Anchor
E1085
E1085
E1085

Task Export

this->_classNameDifftagger must be defined in the child class.

This is a developer issue, contact the developers.

Anchor
E1086
E1086
E1086

Tsk ExportError in Export-Fileparsing. instead of a id="INT" and a optional field="STRING" attribute the following content was extracted: "{content}"The parsing of the internal <lekTargetSeg/> placeholders in the skeleton data failed.

Anchor
E1087
E1087
E1087

Task ExportSee E1086

Anchor
E1088
E1088
E1088

Task ExportError in diff tagging of export. For details see the previous exception.The export with enabled automatic diff of the content fails. The original message of the export should be attached.

Anchor
E1089
E1089
E1089

Task Export with DiffTag syntax error in the segment content. No diff export is possible. The segment had been: "{segment}"In this segment for one closing tag no corresponding opening tag exists - or the tagorder had been syntactically incorrect already before the import in the editor. Therefore it is not possible to create an export with sdl-change-marks in it. Try to export without change-marks.

Anchor
E1090
E1090
E1090

Task Export with DiffThe number of opening and closing g-Tags had not been the same! The Segment had been: "{segment}"Similar to E1089.

Anchor
E1091
E1091
E1091

Task Export with DiffSee E1089

Anchor
E1092
E1092
E1092

Task Export with DiffSee E1090

Anchor
E1093
E1093
E1093

Task Export with DiffSee E1090

Language Resources

EventCodeContextEventMessageDescription / Solution

Anchor
E1050
E1050
E1050

Language Resources; Task

Referenced language resource not found.

This error can happen on the association of language resources to tasks, if the a chosen language resource was deleted in the meantime.

Anchor
E1051
E1051
E1051

Language Resources; TaskCannot remove language resource from task, since task is used at the moment.The association of a language resource to a task can not removed, since the affected task is used by a user at the moment.

Anchor
E1106
E1106
E1106

Language ResourcesGiven Language-Resource-Service "{serviceType}." is not registered in the Language-Resource-Service-Manager!This happens if a task has associated a language resource, which has completly deactivated (for example by deactivating the plug-in).

Terminology

EventCodeContextEventMessageDescription / Solution

Anchor
E1105
E1105
E1105

Terminology

There is no proposal which can be confirmed.

The user tried to confirm a term proposal on a term which does not have any proposal to be confirmed.

Anchor
E1108
E1108
E1108

TerminologyThere is no attribute proposal which can be confirmed.The user tried to confirm a term attribute proposal on a attribute which does not have any proposal to be confirmed.

Anchor
E1109
E1109
E1109

Terminology

There is no proposal which can be deleted.

The user tried to deleted a term proposal on a term which does not have any proposal.

Anchor
E1110
E1110
E1110

TerminologyThere is no attribute proposal which can be deleted.The user tried to deleted a term attribute proposal on a attribute which does not have any proposal.

Anchor
E1111
E1111
E1111

TerminologyThe made term proposal does already exist as different term in the same language in the current term collection.Search for the proposed term in the collection.

Segment

EventCodeContextEventMessageDescription / Solution

Anchor
E1065
E1065
E1065

SegmentThe data of the saved segment is not valid.The data of the saved segment contains invalid data, see error details for more information.

Anchor
E1066
E1066
E1066

SegmentThe data of the saved segment is not valid.See E1065, in addition that the validations contain at least an error where the segment is either to long or to short. This error is separate since it should produce an warning instead just a debug level entry.

Anchor
E1081
E1081
E1081

Segment Pixellength

Textlength by pixel failed; most probably data about the pixelWidth is missing: fontFamily: "{fontFamily} fontSize: "{fontSize}".

Same as E1082 below, but no default width is available for that font and font size.

Anchor
E1082
E1082
E1082

Segment PixellengthSegment length calculation: missing pixel width for several characters.

On of the characters in the segment has no pixel length defined, the default pixel width is used.

This error happens in most cases on the export of a task, where the length of the segments is finally checked. Also it happens on saving a segment.

Plug-Ins

Plug-In Okapi

EventCodeContextEventMessageDescription / Solution

Anchor
E1055
E1055
E1055

Plug-In Okapi

Okapi Plug-In: Bconf not given or not found: {bconfFile}

Either there was no bconf given, or the default bconf could not be found.
Default for import should be: ./application/modules/editor/Plugins/Okapi/data/okapi_default_import.bconf
Default for export should be: ./application/modules/editor/Plugins/Okapi/data/okapi_default_export.bconf

Anchor
E1056
E1056
E1056

Plug-In OkapiOkapi Plug-In: tikal fallback can not be used, workfile does not contain the XLF suffix: {workfile}In seldom scenarios tikal is used for export, if tikal receives an non XLIFF file this error is thrown.

Anchor
E1057
E1057
E1057

Plug-In Okapi

Okapi Plug-In: Data dir not writeable: {okapiDataDir}

Solution: change filesystem rights so that the apache user can write into
./application/modules/editor/Plugins/Okapi/data

Anchor
E1058
E1058
E1058

Plug-In OkapiOkapi Plug-In: Error in converting file {file}. See log details for more information.An error described in message happend on converting the file.
Check the message, since the error could be independent from the given file, for example if some Okapi configuration was wrong, or the Okapi server is not available.
A full log of the happened exception is available in the log.

Anchor
E1059
E1059
E1059

Plug-In OkapiOkapi Plug-In: Configuration error - no Okapi server URL is configured!Set a correct Okapi server URL in the configuration:

Plug-In Groupshare

EventCodeContextEventMessageDescription / Solution

Anchor
E1097
E1097
E1097

Plug-In GroupShare

Multi Purpose Code logging in the context of Groupshare

Multi Purpose Code logging in the context of Groupshare.

Anchor
E1098
E1098
E1098

Plug-In GroupShareGroupshare Plug-In: ExceptionGeneral Purpose Exception

Anchor
E1099
E1099
E1099

Plug-In GroupShareGroupshare Plug-In: No valid license token in cache for current userThere is no valid license token in the cache for the current user. The license token creation for this user was probably done before, but the token does not exist anymore.

Plug-In MatchAnalysis

EventCodeContextEventMessageDescription / Solution

Anchor
E1100
E1100
E1100

Plug-In MatchAnalysis

Multi Purpose Code logging in the context of MatchAnalysis

Multi Purpose Code logging in the context of MatchAnalysis.

Anchor
E1101
E1101
E1101

Plug-In MatchAnalysisDisabled a Language Resource for analysing and pretranslation due too much errors.

Check the details and also the logs for more information.
Enable debugging for domain "plugin.matchanalysis" to get more info about the problems of the disabled language resources.

Anchor
E1102
E1102
E1102

Plug-In MatchAnalysisUnable to use connector from Language Resource "{name}". Error was: "{msg}".

Check the details and also the logs for more information.
Enable debugging for domain "plugin.matchanalysis" to get more info about the problems of the disabled language resources.

Anchor
E1103
E1103
E1103

Plug-In MatchAnalysisMatchAnalysis Plug-In: tried to load analysis data without providing a valid taskGuidA valid taskGuid must be provided here as parameter, to load only the analysis data for one task.

EventCode Design rules / decisions

  • Prefixed with "E" so that a search for the error code through the code is more reliable than just searching for a number
  • No structure in the numbering to prevent discussions is it an error E12XX or E45XX
  • Do not start at 1 and don't use leading zeros.
  • Each usage of an error in the code should get separate code. Even if the error message / reason is the same. Reason is that the help desk might need to do different things in different cases.
    • Information about the error here in the list should not be copied, but errors can point to another errors: "E 4321: See E 1234". Thats work to maintain, but better as confusing the client by giving wrong hints.
    • if it makes sense for the support / help desk to split up an error in different errorcodes because of different reasons, than this should be done in the code so far
  • Never forget the purpose of event codes: make life easier for support / help desk.