Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Code Block
;mandatory database connection information: = "DB_HOST"
resources.db.params.username = "DB_USERNAME"
resources.db.params.password = "DB_PASSWORD"
resources.db.params.dbname = "DB_NAME"

;mandatory default sender email address and name; same address is used as receiver for error mails = MAILADRESSEMAILADDRESS = Support Translate5 ; should be changed to a speakable name

;If there is no local mail server configured, mail sending can optionally be configured to use a third party mail server
resources.mail.transport.type = Zend_Mail_Transport_Smtp = SMTPSERVER

; The following lines about mail configuration are all optional!
resources.mail.transport.ssl = tls | ssl → with ssl the port 465 is used automatically
; If authentication is needed for above configure mail server:
resources.mail.transport.auth = login | plain | crammd5 ; → choose the correct authtype here
resources.mail.transport.username = USERNAME
resources.mail.transport.password = PASSWORD

runtimeOptions.sendMailDisabled = 1 ; with this optional setting all mail sending can be disabled. set to 0 or remove entry to enable mail sending.

Additional Information to the e-mail configuration:

MAILADRESSE: muss mit einer gültigen Mail Adresse ersetzt werden. Diese

wird zum einen als Absender verwendet, zum anderen empfängt diese aber

standardmäßig alle Fehler E-Mails. Durch das Absenderthema, sollte das

eine gültige Adresse bei euch sein, welche die empfangenen Mails an dich

weiterleitet. Die Log Mails können wir dann dediziert auf unsere Support

Adresse umbiegen.

SMTPSERVER: wäre entsprechend der SMTP Server

USERNAME und PASSWORD entsprechend die Zugangsdaten, sofert ein auth

type gewählt wurdeMAILADDRESS: must be replaced with a valid e-mail address. The address is used as sender address (so the configured SMTP server must be able to send mails with this address as sender).
The same e-mail is used as the default receiver for all types of errors in the application. The receiver for logging / error mails can be configured differently.

SMTPSERVER: is the address of the SMTP server

USERNAME and PASSWORD: are the credentials to the SMTP server, if an auth type is configured.


The installation.ini contains: